6
Assembly
After unpacking, check the contents of the box. Check for possible transport damage, and
make sure no parts are missing.
1. Press the tips of spring on the end of the connecting bars (2) and insert into hopper
(3) till the tips align with the holes on the hopper.
2. Attach handlebar (1) to bars (2), sure the tips of spring clips engages the holes on
the handlebar.
Operating instructions
USING YOUR SPREADER
1. Inspect your spreader before each use. Make sure the wheels turn easily when the spreader is
pushed. The hopper should be clean and free from cracks.
2. Do not use spreader on windy days when spreading grass seed or herbicides.
3. Determine approximate square footage of the area to be covered and estimate amount of
material required. Please refer to
fertilizer manufacturer’s recommendation. Break up any
lumpy fertilizer as you fill the hopper.
4. Before filling the hopper, make sure the flow control handle (11) i
s in the“0”position and the
flow control is closed.
5. Every time you are ready to stop or turn back, close the flow control to stop dispersing the
material. This reduces waste and avoids damaging the lawn with oversaturated product
