13
turned anticlockwise the idling is increased. Check that the rear wheel runs freely when the brake
is not activated. If the cruiser does not brake correctly after adjustment, you must see your
authorized dealer.
If adjustment gives you problems, you should contact your authorized dealer.
Check the indicator for wear of the rear brake. Change brake blocks if necessary.
The brake blocks should not be less than 1,5 mm. If they are, they MUST be replaced. Never use
unauthorized brake blocks.
Serial number
The serial numbers of the frame and engine are used to register the cruiser. They are also used to
help the dealer, when you order spare parts or refer to special service information.
The frame number is stamped on the left side of the front bent part of the frame.
The serial number of the engine is stamped beneath the gear pedal.
Frame number:
Engine number:
Maintance
If the cruiser is used in salty conditions, the cruiser must be washed daily. Otherwise the cromed
parts can be damaged. Texas does not cover for damages caused by bad maintance.
Brake/stop light adjustment: The switch is placed
on the right part of the frame right behind the
engine. Adjustment: Turn the adjustment nut to
the left to slow the activation of the brake light.
Turn the screw to the right to get a faster
activation.
