2 Technical Specification
PMC Interface
Mechanical Interface
PCI Mezzanine Card (PMC) Interface
Single Size
Electrical Interface
PCI Rev. 2.1 compliant
33 MHz / 32 bit PCI
3.3V and 5V PCI Signaling Voltage
On Board Devices
PCI Target Chip
PCI9030 (PLX Technology)
CAN Controller
Bosch CC770
I/O Interface
Number of Channels
2
Physical Interface
TPMC316-10R: CAN High Speed (according to ISO 11898)
TPMC316-11R: modified RS485
Bus Line Termination
On board 120 ohms, disabled per default
Transfer Rate
Up to 1 Mbps at bus line length of up to 40 m
Minimum Baud Rate for the TPMC316-10R is 60 Kbps (TJA1050
CAN Transceiver Timeout Feature)
Isolation
CAN bus isolated by optocouplers and DC/DC converter for each
channel
I/O Connector
PMC P14 I/O (64 pin Mezzanine Connector)
Physical Data
Power Requirements
120mA typical @ +3.3V DC
200mA typical @ +5V DC
Note:
Both CAN channels connect to each other and termination active.
Temperature Range
Operating
Storage
-40 °C to +85 °C
-40°C to +85°C
MTBF
TPMC316-10R: 816000 h
TPMC316-11R: 1047000 h
MTBF values shown are based on calculation according to MIL-HDBK-217F and
MIL-HDBK-217F Notice 2; Environment: G
B
20°C.
The MTBF calculation is based on component FIT rates provided by the
component suppliers. If FIT rates are not available, MIL-HDBK-217F and
MIL-HDBK-217F Notice 2 formulas are used for FIT rate calculation.
Humidity
5 – 95 % non-condensing
Weight
61 g
Table 2-1 : Technical Specification
TPMC316 User Manual Issue 1.2.1
Page 7 of 20
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
