TEVVA TEV75B, Быстрый старт

Страница: 25 / 31

Connecting a charging cable
WARNING:
Inspect sockets, plugs and cables for
damage before using the charging
equipment. Do not use any equipment
tha shows signs of misuse or damage,
WARNING: Always make sure that any
excess water is removed from the port
area before connecting a charging
device.
WARNING: Avoid connecting the
charger during torrential rain or storms.
If excessive water is evident around the
charging port, use a suitable cloth to dry
the area before removing the waterproof
blanking plugs and connecting the
charging cables.
WARNING: Do not touch the charging
connector or charging plug when your
hand is wet.
WARNING: Stop charging immediately
if you notice anything abnormal such as
sparks, burning or smoke.
WARNING: Always hold the charging
connector handle or plug when
connecting or removing the charging
cable to avoid damage to the internal
wiring in the cable. Damage such as this
may lead to electric shock or fire. Be
careful not to drop the charging
connector as this could also lead to
damage
WARNING: High voltage charging
equipment can cause interference with
electronic medical devices. When using
medical electrical devices such as
pacemakers, please consult your doctor
about whether charging your electric
vehicle will impact the operation of the
device. In some instances,
electromagnetic waves that are
generated from the charger can
seriously impact medical electric device
operation.
CAUTION: It is strongly recommended
that you use a slow charging method
under usual circumstances. Where
possible, avoid constant or regular use
of rapid chargers.
CAUTION: Do not start the vehicle
during the charging process.
CAUTION: When charging has finished,
switch off the charger (where the option
is available), disconnect the cable from
the vehicle, fit the waterproof blanking
plug(s) and close the charging port door.
Where applicable, disconnect the cable
from the charging device.
CAUTION: Always keep the charging
connector and charging plug clean and
dry. Store your charging cable
somewhere where there is no water or
moisture present.
CAUTION: Only use the correct charger
for charging the electric vehicle. Using
any other charger or connector
configuration may cause failure.
Preparing the vehicle for charging
To prepare the vehicle for charging do the
following:
1. Make sure the parking brake is applied.
2. Make sure the ignition switch is in position
1.
3.06
Starting and driving
Charging the vehicle
L