Tevo Tarantula Pro, Инструкция по сборке

Страница: 18 / 24

33 34
Prepare Slicing Software
Prepare Slicing Software
This printer works with most slicing / printing software like Repe-
tier-Host, Cura, Simplify3D, etc. But we will go in details for Repe-
tier-Host and tell you how to set it up so that you can make your first
print. First, you can download the software from our website at
http://www.tevo.cn/software-download.php
After installation in done and you start the software, you should get
the following screen:
Now we have to set up our printer in the settings so that Repe-
tier-Host can connect to it and will know what size of the build area
our printer use. Open the Printer Settings window (click Config
Printer Settings).
First set port to whatever port your printer use (you have to connect
the printer to your computer before this step, or you can skip Port
setting if you are going to print SD card only.) Set Baud Rate to
250000 and DO NOT touch any other settings in this tab.
Click on Printer Shape tab, change the following values:
X Max – 240
Y Max – 240
Print Area Width – 235
Print Area Depth – 235
Print Area Height – 250