24
After Sales Support
TEL: 1300 886 649
handset can only communicate with one base unit at a time. There are two possibilities:
27.4 Automatic selection
If you set the handset to ‘automatic selection’, the handset will automatically choose the closest base unit in
standby:
• Press the left menu key under
.
• Press the up or down key repeatedly until ‘
Handset
’ is selected.
• Press
to confirm.
• Press the up or down key repeatedly until ‘
Select Base
’ is selected.
• Press
to confirm.
• Select ‘
Auto
’ and press to confirm.
27.5 Manual selection
If you set the handset to ‘manual selection’, the handset will only choose the base unit you have set.
• Press the left menu key under
.
• Press the up or down key repeatedly until ‘
Handset
’ is selected.
• Press
to confirm.
• Press the up or down key repeatedly until ‘
Select Base
’ is selected.
• Press
to confirm.
• Select ‘
Manual
’ and press
to confirm.
• Select the base with the up and down key and press
.
You can only cancel subscription of another handset, not the handset you are using to do the removal
procedure. When you have activated Automatic base selection and the handset is out of range on the
current base, the handset will only search for the strongest base in standby (not during communication).
Caution: Before you can select a base unit, the handset must be subscribed to the base first.
27.6 Using multiple handsets
27.7 Calling another handset
• Press the
INT
key.
• ‘
INTERNAL_
” appears on the display.
• Dial the number of the handset you would like to call.
• After finishing your call, press the on hook key
to hang up.
27.8 Receiving an internal call
• The internal call icon and the number of the handset calling, appear on the display.
