8
m
6
m
6
m
30
O
30
O
face to infrared sensor
Getting Started
4
To
Connect
With
Terrestrial
Signal
Source
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor aerial (not supplied). Perfect
picture quality requires a good signal and generally means that an outdoor aerial must be implemented. The exact type and
location of the aerial will depend on your particular area. Consult your local dealer or service personnel for best advice.
If you are a subscriber of your local CATV net, the outdoor or indoor aerial is not needed.
Connect the equipment as in the following figure.
Install the unit where sunlight will not fall upon the screen directly.
Total dark environment or a reflection on the picture screen may cause eyestrain. Soft indirect lighting is recommended
for comfortable viewing.
Allow enough space between the unit and the wall for proper ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or components.
Notes
about
using
remote
control:
1.The batteries have a typical operating
of
one
year
2.When the remote control will not be used for a long period of
time or when the batteries are worn out, remove the batteries
to prevent leakage.
3.Do not drop, dampen or disassemble the remote control.
4.The effective range of remote control is suggested in the left
figure.
depending on battery brand and use.
Battery
installation
1.Slide or lift the battery cover from back of remote control.
2.Insert two batteries (1.5V) matching the +/- polarity of the
battery to the +/- marks inside the battery compartment.
3.Close the battery cover .
period
TEL: 1300 366 144 WEB: [email protected] 4