
Helpline No.: UK/N. Ireland: 08000 324976 Rep. of Ireland: 1800 523188
6
Web Support: www.unisupport.net
GETTING STARTED – INTERNET RADIO
Steps for connecting your radio to your wireless network
Step 1 - Power up the radio
First, connect to the AC Power. In use, the radio can be switched on or off with the standby
button.
The display on the front of the radio will light up and say:
Internet
Radio
After a few seconds, this will change to show:
Initialising
Network
After a few seconds, this will change to show:
< Scan for networks >
Step 2 - Scan for a wireless network connection
When the display says <Scan for networks>, press the
SELECT
button.
(Note: if you make a mistake at any point, press the
BACK
button to go back to the previous
screen.)
The radio will now scan for all available wireless networks and will display:
Scanning
If it can’t find one, then the display will say:
No Wireless
Networks Found
If this happens then you will have to get your wireless access point working - see the
instructions supplied with it.