BEFORE INITIAL USE
Remove all packaging. Carefully wipe the outer case with a soft cloth. Do not immerse the equipment in water or
any other liquid. Check for any damage that may have occurred during transit. Do not use if the equipment is
damaged in any way or if the supply cord is damaged. Immediately return to supplier for replacement or repair.
PARTS DETAILS
2
OPERATION
This equipment has been designed for general indoor household use only.
UHF/VHF/FM Amplified Indoor Antenna only
Place the antenna on or near the television set.
Connect the antenna output cable to the television set antenna input socket.
Select INT selection on antenna selection switch.
Plug the power cord supply plug into a suitable power outlet and switch power on.
Turn Television set on and select desired channel.
Adjust the UHF and VHF antenna until the best picture is available.
Adjust the ON/OFF Gain Control knob to further improve the picture reception.
Secondary or External Signal Input operation.
Place the antenna on or near the television set.
Connect the antenna output cable to the television set antenna input socket.
Connect the external signal source supply lead to the EXT ANT input socket.
Switch the antenna selection switch to EXT.
Plug the power cord supply plug into a suitable power outlet and switch power on.
Turn Television set on and select desired channel.
Adjust the ON/OFF Gain Control knob to further improve the picture reception.
DC Supply (Optional, not supplied).
For external DC supply, disconnect the AC mains supply lead. Connect a suitable 12 Volt DC supply to DC input
socket.
3
Содержание ANT6710A
Страница 5: ......