Screen
0
0
0
0
Image Position
H Size
V Size
Phase
Clock
Auto Sync
: Move OK/ : Enter EXIT/MENU: Exit
Lock Settings
Screen Settings
If Child Lock is set to “on” , most of the remote and the panel buttons are invalid except [POWER],[VOL ] , [VOL ] ,
<
and the [MENU] buttons on the front side panel and [POWER],[VOL , [VOL
<
] , [OK] , [MENU] and [NUMBER]
buttons on the remote control. Press [MENU] to display the main menu, only Lock Settings can be selected and
adjusted by inputting your password, the [NUMBER] buttons are used for inputting a password.
NOTE:
The factory initial password is “1111”.
Child Lock [Menu, Lock Settings, Child Lock]
PC Setting
PC software setting: Set the PC Software properly
Supported VGA Mode:
VGA SVGA XGA SXGA
Please note: Your PC/Notebook may not be able to display some of these
resolutions.
Take Windows XP as an example, and the Windows system display setting as
illustrated:
1,Right click anywhere on your display, select 'Properties'.
2,Find the Settings tab on the dialogue box, set the screen Resolution.
3,See above details about the resolutions supported by this unit.
4,Click OK to exit.
PC Screen Setting
Image Position: Adjust the VGA image position single unit mode.
H Size: Adjust the horizontal size of the image.
V Size: Adjust the vertical size of the image.
Phase: Adjust the VGA phase to match he PC.
Clock: Adjust the VGA Clock to match he PC clock.
Auto Sync: Auto adjust the VGA image position.
Using the TV
19