1
Helpline No. UK/Northern Ireland 01270 508538 Rep. Ireland 1800 995 036
Web Support www.quesh.co.uk
Model Number: 43744
1. Tuning the unit On / Off
Press any Button to turn the unit on, the
display will show a message WELCOME
to indicate it is ready for use. Press
and hold the POWER/MUTE button
for 2seconds to turn the unit off. The
display will show a message GOODBYE.
2. Mode Selection
Press the MODE Button to cycle the
Play Mode amoung AUX, RADIO and
CD PLAY.
Note: USB mode will only show on the
display when a USB flash memory is
inserted into the USB port.
3. Loudness Control
Press the SEL button until “LOUD OFF”
is shown on the display indicates that
the loudness function is OFF. Turn the
volume knob to select between ON or
OFF.
4. Subwoofer Control
Press the SEL button until “WOOF OFF”
is shown on the display indicating that
the subwoofer is OFF. Turn the volume
knob to select between ON or OFF.
5. Mute Control
Press the POWER/MUTE button once to
activate the MUTE function. Press the
button again or use the VOL +/- Button
to cancel.
6. Volume
Use the VOL +/- Button to adjust the
volume level. The larger the number,
the higher the volume level.
7. Bass
Press the SEL Button repeatedly until
the display shows “BAS”. Use the VOL +/-
Button to adjust. When EQ is ON, bass
control is not available.
8. Treble
Press SEL Button repeatedly until the
display shows “TRE”. Use the VOL +/-
Button to adjust. When EQ is ON, treble
control is not available.
9. Balance
Press SEL Button repeatedly until the
display shows “BAL L-R”, then use the
VOL +/- Button to adjust the balance
between the left & right speakers.
10. Fader
Press SEL Button repeatedly until the
display shows “FAD F-R”, then use the
VOL +/- Button to adjust the balance
between the front & rear speakers.
11. Clock
The time clock can be set anytime when
the power is on. Press the CLK Button on
the faceplate or remote control once,
the time will show on the display.
Then press and hold the button until
the hour blinks on the display. Rotate
the VOL knob to set hours, then press
the VOL knob for the minutes to blink
and rotate the VOL knob to set.
Press the CLK button again or leave the
unit idle for new setting to effect. Press
the CLK button anytime to view the
time clock display.
12. Preset Beep Sound Off
Press the SEL button repeatedly until
“BEEP ON” is displayed. Turn the VOL
+/- Button to select “BEEP OFF” or “BEEP
ON”, then leave the unit idle for setting
to take effect.
13. Preset Equalizer Function
Press the SEL Button repeatedly until
“EQ” indication is displayed then rotate
the Volume knob to choose between
the EQ sound effects. The Sequence of
equalizer setting will be as follows:
14. Dual Color Select
Press the SEL knob repeatedly until the
display shows “Colour 1” or “Colour 2 ”
Turn the volume knob to select between
“Colour 1” or “Colour 2 ” .
Basic Operation
FLAT
OFF
POP
ROCK
CLASSIC
