6
Use
Activating and deactivating
7
With the switch
7
“Power” you can turn the
power supply on or off. If the subwoofer is
activated, the power LED
5
is illuminated in
green. In standby mode it is illuminated in red.
Auto On Level
You can adjust the sensitivity for the activation of the sub-
woofer with the control “AUTO ON LEVEL”
2
. Turning the control
in a clockwise direction increases the sensitivity of the auto-on
function. This means that the subwoofer will already be acti-
vated by a very low audio signal.
Subwoofer volume
With the control “SUBWOOFER VOLUME”
3
you can set the
volume of the subwoofer
Automatic activation/deactivation
1
2
3
4
5
With the switch
4
“POWER MODE” you can switch the operating
state:
Auto On:
The subwoofer activates as soon as an audio signal
is present on the input jack
1
“LINE IN”. If there is no
audio signal for some period of time, the subwoofer
switches to standby.
On:
The subwoofer is continually activated.
Clean the subwoofer regularly with a soft, damp micro
fi
ber
cloth. If possible, only use plain water without any additives. In
case of stubborn marks, a mild soap solution may be used.
Please be absolutely sure to observe the following notes in the
process:
Cleaning and care
Danger
Risk of electric shock!
In contact with live parts, water can lead to electric
shock or short circuit.
• Make sure that no liquid penetrates the unit.
• Disconnect the mains plug before cleaning.
Attention
Risk of damage!
Using the wrong cleaning materials may damage
the delicate surface of the case.
• If possible, only use plain water without any additives.
In case of stubborn marks, a mild soap solution may be
used.
• In no circumstances should caustic cleaning products,
white spirit, thinners, petrol or similar be used for cleaning.
92094 GB 20120301.indd 6
92094 GB 20120301.indd 6
01.03.12 16:18
01.03.12 16:18
