8
• T 1106 / 1 SW
Operation
Activating and deactivating
–
Insert the mains plug in an easily accessible
socket.
The subwoofer will switch on when it is connected
to the mains supply.
The LED
“POWER STATUS” (2)
lights up.
–
If the subwoofer does not receive any signal
for a certain time, it will automatically switch to
standby. As soon as a signal is present again, it
will switch back on.
Connecting the subwoofer
1. The subwoofer will search for a previously
connected device immediately after activation.
During this phase, the LED
“PAIRING STATUS” (3)
will blink slowly.
2. Also switch the device you intend to connect to
pairing mode (see the user manual for the device).
The device and subwoofer should have paired
with one another after a short time. The LED
“PAIRING STATUS” (3)
will then be illuminated
permanently. If the devices do not connect with
each other, please proceed as follows:
3. Hold down the button
“PAIRING” (1)
until the LED
“PAIRING STATUS” (3)
blinks quickly. Also switch
the device you intend to connect back to pairing
mode.