10
• T 1000 SW / T 2000 SW
Troubleshooting
The following advice should help you to solve problems. If this doesn’t work, please contact our hotline (see page 3). Take
note of the warranty instructions.
Problem
Possible cause
Solution
The subwoofer isn’t
working.
The subwoofer is off or doesn’t have any
power.
Turn on the switches
9
and
6
(“On”). Check the
power cord and socket.
Fuse defective.
1.
2.
Disconnect the power
cord.
Carefully pull the fuse
holder out of the mains
connection.
Push the old fuse down
and out. Insert a new
fuse (2 A delayed
action) and push the
holder back.
The volume has been set too low.
Increase the volume with the control
3
.
The subwoofer hums.
The subwoofer is connected to another
circuit than the rest of the system.
Connect the subwoofer and AV receiver to the
same circuit.
The buzzing is caused by problems with
the power supply.
Buy a line fi lter and connect both devices to it.
The buzzing is caused by a multi-outlet
power strip.
Use another multi-outlet power strip or connect
the subwoofer directly to the wall socket. It may
also help to insert the power plug the other way
around.
91830 GB 20110519.indd 10
91830 GB 20110519.indd 10
19.05.11 08:17
19.05.11 08:17
