12
• System 8
Operation
Subwoofer
Activating and deactivating
• With the switch
6
“Power” you can turn the power sup-
ply voltage on or off. After turning on, the subwoofer is
in standby and the power LED
10
“Power” is illumi-
nated in red. If the subwoofer is on, the power LED
10
“Power” will be illuminated in green.
You can control all other functions with the remote con-
trol:
• Switch on and to standby: Push the button
13
“ ”.
Note
: If the subwoofer is not deactivated with the but-
ton
13
“ ”, it will automatically switch to standby if no
audio signal is present for 20 minutes. As soon as an
audio signal is sent, the subwoofer will automatically
activate for music playback.
You can exit this auto-on mode by switching the sub-
woofer to standby with the button
13
“ ”.
• Increase the volume: Push the button
14
“+”.
• Decrease the volume: Push the button
16
“–”.
• Set the volume to THX level: Push the button
17
“THX”,
the display
12
“THX” is illuminated in red.
• Mute the subwoofer: Push the button
18
“ ”. The
power LED
10
“Power” fl ashes in green.
• Turn the sound back on: Push the button
18
“ ” again
or adjust the volume.
14
13
15
16
17
18
10
12
6
91446 GB 20111209.indd 12
91446 GB 20111209.indd 12
14.12.11 13:59
14.12.11 13:59
