14
Teufel
·
Theater 5 Hybrid
M 520 F Controls
Stereo Amp – AV Receiver
With this switch, you can configure the loudspea-
ker's internal circuits according to input source
– “Stereo Amp” for a conventional stereo signal,
or “AV Receiver” for a multi-channel surround sig-
nal with filtering and polarity predetermined by
the receiver.
Bass Level -3 dB / 0 dB / +3 dB
This switch controls the balance between the
active bass signal and the passive midrange/
tweeter signal. The bass level can be increased
by +3 dB or reduced by -3 dB. If you do not want
to change the balance, leave the switch at “0 dB”.
This switch is particularly useful to adapt the
speaker's frequency balance if you are feeding it
a conventional stereo signal. Multi-channel ampli-
fiers usually have their own controls for adapting
the subwoofer level, so in this case you should be
able to leave the switch at “0 dB”.
Power
Switch to “On” to power up the subwoofer; switch
to “Off ” to power it down.
M 520 F rear panel
Line Input
Connect the AV receiver's “Sub Out” to the sub-
woofer's “Line input” using a Y adapter and a
mono cinch cable.
High Level In (left/right)
These inputs are connected to the M 520 F's pas-
sive midrange/tweeter unit. Plug in the speaker
cables coming from the AV receiver's Front
Speaker outputs (L/R) here.
Power
This LED indicates the operational status:
LED on = unit on. LED off = unit off.
Auto-On
With this switch, you can select whether the sub-
woofer is on permanently (“On”) or only when a
signal is detected (“Auto”). In “Auto” mode, LED 1
lights up red until the receiver outputs an audio
signal above the subwoofer's detection threshold,
at which point the subwoofer is activated and LED
1 changes to green.
Fuse
This is where the mains power fuse is located.
1
2
3
4
5
6
7
8
What the icons mean
The lightning/arrow symbol
inside an equilateral triangle
informs the user
about the possibility
of a dangerous, non-isolated
electrical current
inside the device housing,
indicating the risk of
electrical shock.
The exclamation mark within
the equilateral triangle,
which can be seen on the
back of the unit, indicates
that there is important
operating
and service information
for the user to read.
This product complies
with the following
European Union guidelines:
89/336E WG and 73/23 EWG.
The “wastebin” symbol printed
on the type plates and amplifier
labels of our products signifies
that Lautsprecher Teufel ensures
the proper disposal of its sold
loudspeakers and subwoofers
according to Germany's
Electrical and Electronic
Equipment Act.
1
2
3
4
5
6
7
8
