Technical Specifications and Operating Manual
9
· LT 3 PE
Connecting
You can connect the LT 3 PE system to any mod-
ern Dolby Digital/DTS 5.1/6.1/7.1 AV receiver. If you
own a 7.1 AV receiver, simply ignore the Rear Cen-
tre Out(s).
If your receiver is 5.1, connect the front, centre
and rear speakers as shown in Fig. 1.
Connect the subwoofer output (Sub Out) of your
Dolby Digital/DTS AV receiver to the right Line In-
put of the subwoofer using a mono RCA cable as
shown in Fig. 2.
In this setup, the left input (Line Input L) is not
connected. If you want to feed the Sub Out sig-
nal to both of the subwoofer's inputs for an ad-
ditional bass boost, use a Y adapter (see Acces-
sories, p. 6).
Connecting the loudspeakers
to an AV surround receiver.
Note:
The four passive column speakers
of the system are fitted with
identical drivers with the same
technical data. Hence, these
column speakers can be used as
front or rear speakers.
Front, centre and rear speakers
Fig. 1
Subwoofer
Fig. 2
RCA line output
AV receiver
Sub Out
RCA line input
Input R
Subwoofer
AV receiver
Speaker output
Teufel
connection panel
L 330 FR
Front loudspeaker
left
L 330 FR
Front loudspeaker
right
L 330 FCR
Centre speaker
L 330 FR
Rear speaker
left
L 330 FR
Rear speaker
right
Subwoofer RCA line input
L 4200 SW
Active
Subwoofer
