Teufel IP 40 CR, Техническое описание и инструкция по эксплуатации

Страница: 11 / 20

• IP 40 CR 11
Adjusting the balance
Balance means the balance of volume between the right
and left loudspeakers.
Press button 1.
44
"Balance".
The letter "L" appears on the display panel
5
, together
with the preset value for the left channel within a range
of –10 db to +10 db.
Change the volume level for the left channel to suit
2.
your own taste, using dial
1
"Volume" or the buttons
42
"Vol –" and
35
"Vol +".
Press button 3.
44
"Balance".
The letter "R" appears on the display panel
5
, together
with the preset value for the right channel within a
range of –10 db to +10 db.
Change the volume level for the right channel to suit
4.
your own taste, using dial
1
"Volume" or the buttons
42
"Vol –" and
35
"Vol +".
If three seconds pass without buttons being pressed, 5.
the unit switches back to standard mode.
Radio mode
Select one of the two radio reception ranges as your
source (see previous page):
FM
– to receive mono and stereo stations from 87.5 to
108 MHz, RDS mode possible
AM
– to receive mono stations from 522 to 1,629 kHz
20 stations can be stored in each range (see below).
Selecting radio stations
Button
46
"Auto" is used to switch between manual and
automatic search mode. When you press the button,
the text "AUTO" or "MANUAL" appears briefl y on the
display panel
5
.
You can set the reception frequency using buttons
15
and
39
"/–":
Automatic
• : When the button is pressed, the unit
searches the waveband in the desired direction until it
fi nds a station with a suffi ciently strong signal.
Manual
• : Each time the button is pressed, the frequency
is increased or decreased by one step (FM: 0.05 MHz,
AM: 9 kHz).
APS
Search ST/M
Mem
Auto Repeat
Display
1 2
4 5
7 8 9
6
3
0 10+
Balanc e
Station
Source
Vo l Vol
Source
Tuning -
IP 0 RC
4
Tone
-
42
1
5
15
39
46
35
44