10
• CoreStation Compact
Setup / Mounting
NOTICE
If the device is subjected to
warm temperatures after being
cold (e.g. after transport), con-
densation may occur inside of it.
–
In this case, wait approx. 2
hours before you connect and
activate it.
Setup location
You can set up the CoreStation Compact
so that it is concealed as it is controlled
by the TV set via HDMI and the remote
control operates wirelessly. When
setting the device up in a cabinet,
make sure that it is adequately ven-
tilated and aerated to prevent the
CoreStation Compact from overheating.
Location tips
– Select a stable, level base whose
carrying capacity is sufficient for the
CoreStation Compact and TV set.
– Make sure that the environment is
clean and free from dust.
– Select a location away from heat
sources and direct sunlight.
– Lay the connector cords so that they
do not pose a tripping hazard.
– Do not place any heavy objects on
the cables.
Mounting behind a TV set
You can also mount the CoreStation
Compact behind a suitable flat screen
TV using the enclosed mounting brack-
ets
햴
:
• The TV set must be in a stable posi-
tion and must not be secured with a
wall bracket.
• It must be prepared for a wall brack-
et in accordance with VESA. Such TV
sets have a stable mounting frame
behind the rear panel where you can
only see the screw holes on the out-
side. Please refer to the user manual
for your TV set in this respect.
You will also need two or four screws
that fit the VESA holder on your TV set.
For this, be absolutely sure to observe
the notes in the user manual of your TV
set. These screws must not be too long
and are not part of the product con-
tents of the CoreStation Compact.
