10
• Concept C 300 WL
Basic functions
Activating and deactivating
• Using the mains switch
7
, you can activate or deacti-
vate your Concept C 300 WL. After activation, your
device is in standby mode and LED
1
“Standby” is red.
• With the button
1
“Standby”
or
12
, you can switch
your
Concept C 300 WL
to operating and/or
standby mode (Standby). In the operating mode, the
LED
1
“Standby” is blue.
Selecting a source
After activation, the USB sound card is activated as a
source.
• Using the button
14
“Input”, you can switch the source
between the USB sound card and RCA jacks.
When you switch, the LED
1
“Standby” is purple
briefl y.
Adjusting the volume
• Increase the volume: Press the button
15
+.
• Decrease the volume: Press the button
15
–.
Adjusting the bass level
You can adjust the volume of the subwoofer separately.
1. Press the button
13
“Bass”
.
The LED
1
“Standby” is purple.
2. Adjust the base level as you like using the buttons
15
+
/
–
.
3. Press the button
13
“Bass”
.
The LED
1
“Standby” is again blue. If no button is
pressed for six seconds, the device will also switch to
normal operation.
Connecting to a power supply
• Ensure that the mains switch
7
“Power” has been
turned off (“0 OFF” setting).
• Connect the mains connector jack
8
with a power sup-
ply socket via the mains cord
.
8
7
1
12
13
14
15
91236 GB 20110601.indd 10
91236 GB 20110601.indd 10
01.06.11 16:27
01.06.11 16:27
