14
·
Cinebar 50
USB playback · Repeat function
Playback from USB storage media
You can select a USB medium as a sound source by
pressing the USB button. USB sticks with a capaci-
ty of up to 8 GB and hard drives up to 160 GB are
supported. The storage device must be formatted
in FAT 16/32 format. MP3 and WM3 files can be read,
but not WAV format. Subfolders on the USB device
are also recognised. The tracks are played or se-
lected according to the file hierarchy, and in alpha-
betical order within a level of the file structure.
Depending on the USB device and the quantity
of MP3/WMA files it contains, the reading process
may take a while. The reading process is indicated
on the display with the message “Loading”.
Start playback by pressing the play button, which
also functions as a pause button. The display
shows the track number currently selected and
the play time. The display also shows a small sym-
bol for the playback and pause functions as well
as an MP3 symbol.
Repeat function
Press the repeat button to switch the repeat
function on or off. You can choose between no
repeats, repeating the current track or repea-
ting all tracks. The display shows you the selected
mode:
Ě
Re Off No repeats
Ě
Re 1
The current track will be repeated.
Ě
Re All All tracks will be repeated
Note
When you insert a USB device
into the selected USB port, the
“Loading” message will be shown
in the display. The first track will
then start to play automatically.
The same applies if you switch
on the Cinebar 50 System with
a USB device inserted and if the
USB port was the last selected
source.
Track selection
Use the “Prev” and “Next” buttons to select
tracks.
Press the “Next” button to skip to the beginning
of the next track.
Press “Prev” to select the beginning of the cur-
rent track and press it again to jump back to the
beginning of the previous track.
Ě
||
ĚĚ
|
ĚĚ
|
USB
