13
• BAMSTER PRO
Operation
Activating/deactivating
• Press the -button
⑦
to switch the device
on/off.
• If the BAMSTER PRO has been switched on,
the red LED of the -button
⑦
will illumi-
nate.
It will turn off when unit shuts down.
Tip: You should always turn off your
BAMSTER PRO when it is not in use to save
battery power.
Automatic deactivation
When the BAMSTER PRO is not in opera-
tion and you do not push any button, the
BAMSTER PRO will switch off after approx.
40 minutes.
Volume
By turning the volume control ring
⑤
you can
increase or decrease the volume in 24 steps.
The current setting is shown by the LED ring
display
⑨
. After 5 seconds, the LED ring dis-
play is turned off.
The volume level of the source device
will also affect the volume of the
BAMSTER PRO.
Widening sound
With the
-button
③
you can switch widening
sound (Dynamore
®
) on und off. When on, the
red LED in the button lights up.
Call up the battery charge status
While the BAMSTER PRO is turned on, press
the
button
①
. The LED ring display
⑨
will
light up and display the battery charge status.
To go back to “normal” volume display, press
the
button
①
again, or wait 5 seconds.
