20
ASSEMBLING THE CABIN
GB
M5x25
Ø5
C
C1
C1
C
4,2x45
Ø5
C1
A
B
Y
X
POSITIONING THE
BATHTUB
Remove the screws indicated by
the arrow in order to remove the
front panel.
Pull the bottom part of the panel
towards you so that the (Y) clips
c o m e o u t o f t h e i r r e s p e c t i v e
housings.
Place the bathtub in the corner of
the bathroom and make sure it is
on a level by using the appropriate
adjustable feet.
Prepare the drain connection using
the trap supplied.
N.B.: The unit must be installed
after the floor and walls have been
finished.
1
2
ASSEMBLING THE BACK
PANELS
Move the shower base away from
the corner in order to proceed with
the subsequent assembly steps.
Remove the screws (C1) from the
end of the lower track.
Apply silicone to the end of the
track as shown in the diagram.
Place the back panels (A) and (B)
onto the shower base and insert the
screws with the washers (C) to
fasten the panel frames to the
bathtub.
Fasten the panels to the track with
the screw (C1) removed earlier.
All screws and accessories which
are necessary for installation are
in the appropriate box
Bag (A) with screws for
step 2
