Synchronising the controller to receiver
Brighter for longer
CONTROLLER AND RECEIVER
www.teucerled.co.uk
1)
Ensure the wall panel is connected to a power source
3)
Ensure the receiver has power. Press the learning key on the receiver.
4)
Touch the ON button on the zone you wish to synchronise the receiver to. The LED strip
will blink twice to confirm synchronisation.
6)
To clear the receiver from a selected zone, simply press and hold the learning key for 5 or
more seconds. The receiver will be reset to the default factory settings.
1
2
3
LRR-WTC
Learning Key
4
MASTER SLAVE
close circuit for MASTER
open circtuit for SLAVE
WP-2TW and LRR-WTC
2 zone RF & WIFI controller and receiver for single colour LED strip
2)
Set the receiver LRR-WTC as a MASTER OR SLAVE.
Allocating the receiver as a master or slave is important to ensure your LED strip and receiv
-
er are fully synchronised. There can be only 1 master receiver per zone.
1
2
3
LRR-WTC
Learning Key
4
MASTER SLAVE
Learning key
Zone 1
Zone 2
ON bu�on
5)
Just repeat the learning process to synchronise several receivers to the same controller.
