Teucer`s 2 zone touch panel allows users to control 2
separate zones of lighting from a single wall unit. Using a RF
signal to control the LED lighting, removes the need to have
additional wiring between the wall panel and the receiver,
which allows greater flexibility during installation by
reducing installation time and cabling costs.
WP-2TW and LRR-WTC
2 zone RF & WIFI controller and receiver for single colour LED strip
Product Description
Technical Specification
Brighter for longer
CONTROLLER AND RECEIVER
www.teucerled.co.uk
Controller
Order Code
WP-2TW
Type
RF wall panel, WIFI transmitter
Input Voltage
12-24VDC
Operation Frequency
868MHz
Dimension
86x86x29mm (WxLxH)
Power
10W driver LD-IP10/24
Receiver
Order Code
LRR-WTC
Type
RF receiver
Input Voltage
12-36VDC
Current
4X5A
Output
4X(60-180)W
Note
Constant voltage
Dimension
46x178x22mm (WxLxH)
•
Smartphone / tablet compatible via Easy Lighting app
•
Wireless RF range of 8-15 meters (depending on signal
obstacles within the installation area)
•
Control 2 zones independently
•
Touch sensitive glass
•
5%-100% smooth dimming
•
Backlit buttons for night time use
Features
RF technology allows for greater flexibility when it
comes to controlling simple or complex lighting instal
-
lations without the need of additional cabling.
There are some limitations where installations have
the receivers enclosed in electrical boxes or hidden
away in a ceiling , reducing the RF signal strength and
therefore the communication range.
In order to overcome these RF Signal restrictions we
suggest the following when synchronising our RF con
-
trollers and receivers:
•
Keep the distance within 10 meters from the con
-
troller to the receiver
•
When expanding your lighting, always try and use
a signal repeater (PR-RGB), where possible.
•
If your installation requires several RF receivers,
ensure the “master” receiver is positioned in the
middle.
Recommendation
