This controller is used to control and dim single colour LED
strip. It enables the user to access 3 pre-set lighting levels
from the touch of a button or adjust your lighting with
smooth dimming (5%-100%) via the touch sensitive wheel.
Product Description
Technical Specification
Brighter for longer
CONTROLLER AND RECEIVER
www.teucerled.co.uk
Controller
Order Code
LR-W
Type
RF remote controller
Input Voltage
3.6VDC
Operation Frequency
2.46GHz
Dimension
56x113x22mm (WxLxH)
Power
Batteries 2xAAA
Receiver
Order Code
LRR-W
Type
RF receiver
Input Voltage
12-24VDC
Current
2x6A
Output
2x(72-144)W
Note
Constant voltage
Dimension
45x85x23mm (WxLxH)
Features
RF technology allows for greater flexibility when it
comes to controlling simple or complex lighting instal-
lations without the need of additional cabling.
There are some limitations where installations have
the receivers enclosed in electrical boxes or hidden
away in a ceiling, reducing the RF signal strength and
therefore the communication range.
In order to overcome these RF Signal restrictions we
suggest the following when synchronising our RF con-
trollers and receivers:
• Keep the distance within 10 meters from the con-
troller to the receiver
• When expanding your lighting, always try and use
a signal repeater (PR-RGB), where possible
• It is not recommended to use more than 4 receiv-
ers with a single zone controller.
• This controller / receiver does not have a master/
slave function, meaning if you connect several
receivers to the same controller, the LED strip will
become unsynchronised when put into a colour
changing programme (play mode), however it will
not affect the performance in the static mode.
Recommendation
• 5%-100% smooth dimming capacity
• Touch sensitive brightness wheel
• Wireless RF (Radio Frequency) range of 8-15m (de-
pending on signal obstacles within the installation area)
LR-W and LRR-W
1 zone RF controller and receiver for single colour LED strip
