Controller Layout
page 2
Reciever Wiring Diagram
RF technology allows for great flexibility when it comes to controlling simple or complex lighting installations
without the need of wiring. There are limitations in some cases due to receivers installed in enclosed
electrical boxes or in ceiling voids hence reducing the RF signal strength and the communication range.
In order to overcome these RF signal restrictions we suggest the following procedure when synchronising
our RF controllers and receivers:
*Keep the distance between the controller and the receiver within10 meters.
*When expanding your lighting, we recommend the use of ‘power repeater's, if synchronisation of the
additional strips is required.
*Never synchronise more than 4 receivers to a single zone (if kept on a single colour).
*Never synchronise more than 1 receiver to a single zone.
The controller & receiver do not have a MASTER / SLAVE function, meaning if you connect several
receivers to the same controller, the LED Strip will become unsynchronised when put into a colour
changing programme.
on
off
ON Button
Brightness low
High Brightness
Low Brightness
High Brightness
Medium Brightness
OFF Button
Warm White colour temperature
White colour temperature
