KEY ITEM DESCRIPTION
ITEM NO.
3 Gallon
5 Gallon
1
Clear Lid
ML90539 ML90536
2 Aquarium
PR3300 PR3600
3 Base
ML90535
PR3602
4
LED Aquarium Light Assembly
29010
5
Micro Filter Assembly
25799
Parts Diagram & Identi
fi
cation
Replacement Parts List
For questions or missing parts contact customer
service at (800) 526-0650 • www.tetra-
fi
sh.com
M-F 7:30 A.M. to 5:30 P.M. Eastern Time
© 2012 Tetra Holding (US), Inc.
Tetra®, Whisper®, and Bio-Bag® are registered trademarks.
1
2
3 Gallon
5 Gallon
3
4
5
1
2
3
LIMITED WARRANTY:
Within one year from the date of original purchase, we will repair
or replace, at our option, any Crescent Aquarium System which is deemed defective in
workmanship or materials. This includes: Lid, Base, Aquarium, LED Light, LED Power
Supply, and Whisper
®
Micro Filter Assembly.
If the Crescent Aquarium System is found to be defective, and has not been modi
fi
ed,
damaged or misused, please return the unit with a copy of the receipt and proof of
date of purchase: Call (800) 526-0650 for return authorization and shipping address.
Damage or injuries resulting from improper installation, negligence or misuse are
expressly not covered by this warranty. Incidental or consequential damages are
speci
fi
cally excluded.* Fish loss, personal injury, property loss or damage resulting
from use of these products are not covered by this warranty. Incidental or consequential
damages are speci
fi
cally excluded.* This warranty gives you speci
fi
c legal rights.
You may also have other rights which vary from state to state.
* Because some states do not allow the exclusion of incidental or consequential damages,
this exclusion may not apply to you.
SYMPTOM
COMMENTS/SOLUTIONS
If the Micro Filter
water
fl
ow appears
reduced or the
motor is making
noise, or has
stopped pumping
water. . .
If the LED Light
won’t turn on. . .
• Unplug the Whisper
®
Micro Filter. Remove it from
aquarium. Remove the Pump Motor from the Filter
Housing. Slide Impeller Cover off. Remove Impeller from
Impeller well and rinse it in cold water. Do not use cleaning
agents of any kind. Make sure there are no obstructions.
Replace the Impeller, the Impeller Cover and the Pump
Motor back on the Filter Housing. Place the Micro Filter
back into the aquarium and plug it in.
• Make sure that the Power Supply is plugged into an
electrical source. Check to make sure that the Power Supply
Jack is inserted fully into the plug on the bottom of the LED
Aquarium Light.
Troubleshooting Guidelines
Customer Support: 800.526.0650 • www.tetra-
fi
sh.com
01/12 P/N 29002-908
IMPORTANT:
Always unplug your
Crescent Aquarium Kit when
inspecting or disassembling
for any reason
