FF711BG
7-7
Tetra Pak
Hoyer
1
5
2
3
4
8
9
7
6
Fig.7.6
7.3.3 Mixer drive unit
If the mixer runs noisily, remove the clamps (Part.1/
5, Fig.7.6) dismantle the pipe and pull out the mixer
(Part.2, Fig.7.6). Take off the bushing (Part.4,
Fig.7.6) and remove the gaskets (Part.3, Fig.7.6).
Check the condition of the bushing and the gaskets
and if necessary replace.
Remove the casing and release the shaft (Part.9,
Fig.7.6) from the reducer (Part.7, Fig.7.6).
Dismantle the support (Part.6, Fig.7.6), pull out
the shaft (Part.9, Fig.7.6) and replace the seal
(Part.8, Fig.7.6).
Reassemble carefully in the reverse order.
RETURN TO PM
