manualshive.com logo in svg

Tetra Pak HOYER COMET N, Руководство пользователя

Поделиться
Скачать
Tetra Pak HOYER COMET N Скачать руководство пользователя страница 37

5-17

Tetra Pak

Hoyer

 CN  03 E A 01

DOSER 1

###°

START

: ###° CONSENT: #

DOSER DOWN

: ON=###° OFF=###°

DOSER OPEN

: ON=###° OFF=###°

TWISTER

: ON=###° OFF=###°

CHOCO RELEASE

: ON= #

OFF=###°

8/22

DOSER 1

###°

VOLUMETRIC

: (0/1) #

ON=###°

INDRAMAT

: (0/1) #

HEATING

: ON= #

OFF=###°

9/22

OFF values.

SPRAYER OPEN: Parameters relative to the
moment when beginning of chocolate spraying
within the wafer is required. Set ON and OFF
values relative to the opening/closure of the
sprays.

SPRAYER PUMP: Parameters relative to
moment when the volumetric pump for chocolate
must be activated. Set ON and OFF values rela-
tive to the pumping/suction of volumetric
cylinders.
PUMP OFF TIME: ON/OFF time of the volumetric
pump. When the machine is still it is necessary to
continue pumping chocolate through the chocolate
pipes to avoid that the chocolate solidify. Set the
PUMP OFF TIME to a value different from zero to
obtain pumping action. If the time is set to zero, this
function is disabled.
NOTE: When the choco-sprayer station is used,
resistances for heating chocolate must be started
by pressing A1.
To set or edit the data, follow the instructions
provided in 

“INSTRUCTIONS ON THE USE

OF THE OPERATOR PANEL TO EDIT OR
ENTER DATA”.

Go to page 8/22 by pressing  

pdown

The following page is displayed:

START: Angular value that allows enabling of the
station during automatic start, and disabling during
automatic stop. The value must always be lower than
or equal to the lowest of the values set on this page.
DOSER DOWN: Parameters relative to the
downwards/upwards movements of the station
to bring the dosing nozzles towards the cones ( or
cups ). Set ON and OFF values. If using a
volumetric doser, set both values to zero degrees
to disable this command.

DOSER OPEN: Parameters relative to the
opening/closure of the doser that fills the
containers ( cones or cups or tubes ). Set ON and
OFF values. If using a volumetric doser, set both
values to zero degrees to disable this command.

TWISTER: If the station performs dosing with nozzle
rotation ( TWISTER ), set rotation ON/OFF in this
field. Otherwise, set the values to zero degrees.

CHOCO RELEASE:  Parameters relative to releasing
chocolate into the product (if the product is a
JAPANESE CONE). Set ON and OFF values.

ON: Turns the volumetric doser on. It is turned off
automatically by a sensor placed on the doser cylinder.

Go to page 9/22 by pressing  

pdown

The following page is displayed:

The following items are shown:

CONSENT : If this value is set to 1, it allows
automatic operation of the station.
Set this value to 1 if automatic operation of the
DOSER (1) station is required.

Содержание HOYER COMET N
























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды