Tethon 3D Bison 1000, Руководство пользователя

Страница: 15 / 16

Troubleshooting
●
Print is not adhering to the build plate.
○
Re-zero the build plate.
○
Replace film in resin tray
●
Light Engine is not turning on.
○
Restart printer.
○
Check brightness setting.
●
Printed object is stretched or squashed
○
Check to make sure the layer thickness is set to the
same thickness as the slice file. (would this be a resin
troubleshooting)
●
Heater does not turn on
●
Build plate is stuck at the top and printer will not boot up
14