ROCK SOLID
PhotoBooth Kit for Stands and Tripods
Adjust the height of the tripod to the desired
position for the monitor. Make sure to extend
the center column at least the width of the
Rock Solid Master Clamp.
Mount the Rock Solid VESA Local Monitor
Mount to the monitor.
Using either the Arca-swiss mount on the
Rock Solid VESA Local Monitor Mount or by
attaching your ballhead plate to the Rock Solid
VESA Local Monitor Mount, mount the monitor
on the tripod.
Attach the Rock Solid Master Clamp to the
center column of the tripod.
Attach the Rock Solid Master Articulating
Arm to the Rock Solid Master Clamp.
Attach the Camera Platform to the top of the
Rock Solid Master Articulating Arm.
Attach your camera to the Camera Platform.
While holding the camera, loosen the Rock
Solid Master Articulating Arm knob. The arm
and platform will become slack. Position the
camera over the monitor with one hand and
tighten the knob with the other.
SETUP INSTRUCTIONS FOR A TRIPOD
It is highly recommended to hang a
dual wing sand bag from the center
column of the tripod.
