Tesup ATLAS X, Руководство пользователя

Страница: 5 / 32

5
2.1 GENERAL INSTRUCTIONS
2.
G
ENE
R
AL
•
Before you begin installing, read this entire owner’s manual. Identify and
note your model wind turbine where it appears in this manual. Following
the instruction and recommendations in this manual will help assure safe
and enjoyable use of your new renewable energy system. Please take the
time to read through this manual prior to assembly.
•
Place this instruction manual in a safe place for reference.
•
Wait until a calm day to install or perform maintenance on your Turbine
with activation of brake.
•
Listen to your Turbine, if you hear any mechanical noise, maintenance
may be required, please contact your Turbine dealer.
•
After installation re - adjust and tighten the screws and bolts.
•
Adhere to proper grounding techniques as established by the National
Electrical Code.
•
Your Wind Turbine must be installed in accordance with this manual
and local and national building code. Incorrect installation may void
your warranty.
•
Wind Turbine blades spin at a potentially dangerous speed, this must be
respected. Never approach a Turbine in motion.
•
Note wire size prior to wiring. Any under sizing of wire can be poten-
tially dangerous.
•
Check the manual brake periodically.
•
Check the battery health periodically. The low battery voltage and im-
proper connection can cause over
- spin issues.
2.1.1 OPERATING & INSTALLING CONDITIONS
•
Please make sure that:
•
The wind turbine system has been erected correctly by a suitably
trained person.
•
All operating personnel have read and fully understood this translation
of the original instructions
•
The wind turbine system is properly maintained and repaired.
ATLAS X (MADE IN EUROPE)