4
CAUTIONS
Before opening the cylinder valve (1), check carefully that the regulator is
completely closed (turn the pressure adjusting screw (6) anticlockwise).
3.2 How To Regulate Pressure
To increase pressure: slowly turn the regulator pressure adjusting screw (6) clockwise.
To decrease pressure: slowly turn the regulator pressure adjusting screw (6) anticlockwise.
CAUTIONS
Using the pressure adjusting screw (6) it is possible to compensate an eventual
pressure drop.
Outlet pressure must not be regulated higher than the pressure you need to use
when flowing.
Outlet pressure must not be regulated higher than the red mark on the low
pressure gauge (5).
3.3 Closing
Close the cylinder valve (1).
Release the gas until the regulator gauges indicate "zero".
Turn the pressure adjusting screw (6) anticlockwise till it is completely closed.
3. INSTRUCTIONS FOR USE
The pressure regulator must be treated as a precision instrument.
When the pressure regulator is not to be used for long periods, store it in its wrapping or
in its box , to prevent contact with dust, oil and other sources of dirt.
Do not carry out maintenance or repairs, other than the following.
Use only original OxyTurbo spare parts and accessories.
Spare parts are available also from your retailer.
In case of failures which cannot be repaired following these instructions, take your
pressure regulator back to the retailer.
4. STORAGE
5. MAINTENANCE
