TESTO Sensor LD pro, Инструкция по эксплуатации

Страница: 17 / 48

Operation
Testo Sensor LD pro - V2.00
Page 17 of 48
10 Settings
The operation is largely self-explanatory and menu-driven via the touch panel.
The selection of the respective menu items occur via short "tapping" with the finger or a soft round pen.
Attention:
Please use no pens or other objects with sharp edges!
The foil can be damaged!
10.1 election of measurement tool
Actual there are 4 different measurement tools available

Acoustic trumpet For general measurements (0.2 - 6m) in directly accessible areas

Focus tube with focus tip For punctual measurements in directly accessible areas

Gooseneck For punctual measurements in hard-to-reach areas

Parabolic mirror For leakage measurements (3m - 12m) at longer distances
Home

Configuration

Parameter

Sensor type
oder
Setting button

Parameter

Sensor type
The required or desired measuring tool can
be selected using the
"Sensor type"
selection field in the
"Parameters"
menu.
After selection of the field, the menu
"Select sensor type"
is opened..
Please select the required measuring tool
and confirm it with
"OK"
.
Note: The measuring tools
"Gooseneck"
and
"Parabolic mirror"
must be
activated / loaded during initial
commissioning, see chapter
"Import/Export".
Use the key e o obtain further
information such as the serial number.