TESTO REXS, Руководство пользователя

Страница: 34 / 42

7 testo REXS Testing/Programming GUI
34
4 ER04 - FLNO Flame still burning afte flushing of burner
5 ER05 - FLO Flame not detected
6
ER06 - MFC1 Actual value of C
3
H
8
mass flow controller out of
tolerance window
7
ER07 - MFC2 Actual value of N
2
mass flow controller out of
tolerance window
8
ER08 - MFC3 Actual value of oxidation air mass flow controller out
of tolerance window
9
ER09 - MFC4 Actual value of quench air mass flow controller out of
tolerance window
10
ER10 - MFCS Actual values of some mass flow controllers out of
tolerance window
11
ER11 - MFCA Actual values of all mass flow controllers out of
tolerance window
12 ER12 - BUPR Burner differential pressure above 500mbar
13 ER13 - EMER Stop on emergency
14 ER14 - SSP System error caused by synchronous serial port
15 ER15 - HRS System error caused by operating hours overflow
16
ER16 - SWTO System error caused by timeout of connected GUI
software
17 ER17 - STFL Flow error during start sequence
18 ER18 - WROP Error when setting operating point
19 ER19 - ILST Emergency shutdown or power loss
20 ER20 - NVOP No valid operating point defined
21 ER21 - IGNF Ignition failure
If the testo REXS GUI is connected to testo REXS, the error is also displayed in a error window.
Shut down Testo REXS, locate the error source, fix the error and then click OK.