Recording the image
1
Freeze image: Press trigger button
➁
once.
2
Save image: Press trigger button again.
or
Discard image: Press
[Esc]
➀
.
Getting to know the menu
1
Open menu: Press
[OK]
➀
.
2
Navigate: Move
Joystick
➀
up / down.
3
Open submenu (only for menu points marked
with ): Move joystick to the right.
4
Call up a function: Press
[OK]
.
or
Exit menu: Press
[Esc]
➁
.
Focusing the picture
Turn
lens
➀
by hand.
Switching on / off
Remove
protection cap
➀
from the lens.
Switch on: Press [
]
➁
.
- The measurement view is opened after the warm-
up period.
- The thermal imager performs an automatic
zeroing approx. every 60 sec. This can be
recognized by a “click”. The image is frozen
briefly when this occurs.
Switch off: Press [
] again.
➆
➅
➂
➃
Apply
➄
➁
➀
➀
➁
➀
➀
➁
Measurement
Image gallery
Scale...
Display...
Emissivity...
Palette
Configuration
Commissioning
1
Push the
rechargeable battery
➀
all the way
into the rechargeable battery slot until this is flush
with the bottom of the handle.
- The thermal imager starts automatically.
2
Remove protective film from the
display
➁
.
- Instrument language (
Language
) and temperature
unit (
Unit
) can be set:
3
Move
Joystick
➂
up / down to select the desired
option.
4
Press
[OK]
➂
.
5
Move
Joystick
up / down to change the setting.
6
Press
[OK]
.
7
Press
[Apply]
➃
function key to apply the
settings.
8
Press
[
]
➄
to switch off the thermal imager.
9
Connect
mains unit
(
)
➅
.
10
Completely charge battery (3 hours).
11
Insert
Memory card
in the card slot (
SD
)
➆
.
- The camera is now ready for operation.
➀
➁
All manuals and user guides at all-guides.com