Brief instructions
en
testo 875i · Thermal imager
Contact
GREAT BRITAIN / IRELAND
Testo Ltd.
Alton, Hampshire GU34 2QJ
Tel. (14 20) 54 44 33, Fax (14 20) 54 44
E-mail: [email protected]
USA
Testo Inc.
Flanders, NJ. 07836
Tel. (973) 2 52 17 20, Fax (973) 2 52 17 29
E-mail: [email protected]
AUSTRALIA
Testo Pty Ltd
Croydon South VIC 3136
Tel. (3) 98 00 46 77, Fax (3) 98 00 46 99
E-mail: [email protected]
The most up-to-date address details of our subsidiaries and
agencies can be found in Internet at: www.testo.com
Changing assignment of the quick
select buttons
Change the left or right quick select button:
1
Call up: Move
Joystick
➀
to the left or right.
2
Navigate: Move
Joystick
up / down.
3
Confirm: Press
[OK]
➀
.
or
Cancel: Press
[Esc]
➁
.
Getting to know the quick select
buttons
Using the quick select buttons, the set functions are
called up directly. Factory settings:
Left quick select button
➀
: Adjust scaling.
Right quick select button
➁
: Select image type.
Warning!
Eye damage due to laser beam.
Do not look into the laser beam and do not point
the laser beam at people.
0971 8754 en 0
2
en
➀
➁
Scale…
Image type
➀
➁
Image type
Palette
Emissivity...
Scale...
Adjustment
These short instructions
describe the basic operating
steps. Please refer to the
instruction manual to find out
how to handle the product
safely and for detailed
information.
You can find this at
www.testo.com
in the
Downloads
section of the
relevant product detail page.
Analysis software testo IRSoft
Use the
testo IRSoft
software to analyze your thermal images extensively and in
detail, and to create professional reports.
You can download the software free of charge and licence-free via the following
link:
www.testo.com/irsoft
All manuals and user guides at all-guides.com
all-guides.com