6 Performing the measurement
19
The
Measurement settings
menu opens.
3
- Select
Differential temperature
and press
OK
.
4
- Select
Active
and press
OK
.
5
- Select which differential temperature is to be calculated (P A vs. P B,
P A vs. Probe, P A vs. Value, P A vs. RTC).
5.1
- P A vs. P B selection:
o
Move the
joystick
to the right → select measuring point
1
→
press
OK
→ move the measuring point to the live image using
the
joystick
→ press
OK
.
o
Move the
joystick
to the right → select measuring point
2
→
press
OK
→ move the measuring point to the live image using
the
joystick
→ press
OK
.
5.2
- P A vs. Probe selection:
o
Move the
joystick
to the right → select measuring point
1
→
press
OK
→ move the measuring point to the live image using
the
joystick
→ press
OK
.
5.3
- P A vs. Value selection:
o
Move the
joystick
to the right → select measuring point
1
→
press
OK
→ move the measuring point to the live image using
the
joystick
→ press
OK
.
o
Move the
joystick
to the right, set the value manually.
5.4
- P A vs. RTC selection:
o
Move the
joystick
to the right → select measuring point
1
→
press
OK
→ move the measuring point to the live image using
the
joystick
→ press
OK
.
o
Move the
joystick
to the right, set the RTC value in the
Emissivity
menu, see the section "Setting RTC".
The differential temperature is shown in the top centre of the display.
6
- End measurement: Select
Active
and press
OK
(no check mark).
6.2
Saving an image
1
- Press
Trigger
.
The image is automatically saved.
