TESTO 606-1, Инструкция по эксплуатации

Страница: 16 / 80

Using the product
> Press several times until the desired material
characteristic curve appears.
ã
Testing the instrument function:
1 Press several times until
Test:
lights up.
2 Connect sensing electrodes with the contacts of the test
resistor on the top of the protection cap.
-
Test
flashes.
-
Test: ok
lights up: instrument is functioning.
Test: ok
does not light up: test not possible, see chapter
‚Tips and assistance‘.
3 Press back to measurement menu.
ã
Changing the display view:
Adjustable views
· Current reading
·
Hold : Readings are held.
> Press until the desired view appears.
ã
Switching the instrument off:
> Press and hold until the display goes out.
Maintaining the product
â
Changing batteries:
1 To open the battery compartment, push the battery cover
down.
2 Remove used batteries and insert new batteries
(2x 1.5 V type AAA). Observe the polarity!
3 To close the battery compartment, push the battery cover
back on.
â
Cleaning the housing:
> Clean the housing with a moist cloth (soap suds) if it is dirty.
Do not use aggressive cleaning agents or solvents!
16