TESTO 350 Maritime V2, Инструкция по эксплуатации, Страница: 56 / 106

6 Using the product
56
The headers (lines 1-3) and the footer for the printout can be set.
To be able to transfer data to a record printer via infrared or
Bluetooth interface, the printer used must be enabled.
The following printers can be used with the testo 350:
- infrared high-speed printer (order no. 0554 0549)
- Bluetooth
® /IRDA printer (order no. 0554 0620)
Calling up the function:
>
[ ] → Instrument Settings → [OK] → Printer → [OK]
Activating the printer:
The printer 0554 0620 can only be selected after the
Bluetooth ® -interface has been activated, see
Bluetooth® , page 56.
1. Select Printer → [OK] .
2. Select the printer: [▲] , [▼] → [OK] .
- The printer is activated and the menu
Printer
is opened.
Setting the print text:
1. Print text → [OK] .
2. Select function: [▲] , [ ▼ ] → [Edit] .
3. Enter values → [Next] .
4. Save the entry: [Finished] .
6.1.2.8. Bluetooth
®
This menu is only available if the instrument is equipped with
Bluetooth ® option. The Bluetooth module can be switched on / off.
This function is available in both the meas. box and the Control
Unit. Settings only apply for the device activated at the time.
To set up a connection between Control Unit and meas. box, see
Connection via Bluetooth
®
(option), page 39.
To set up a connection between Control Unit and Notebook/PC:
Follow the operating instructions for the software and Notebook/PC
used.
Calling up the function:
>
[ ] → Device settings → [OK] → Bluetooth
®
→ [OK] .
Switching Bluetooth ® on / off
1. [Change] .
2. Select setting: [ ] , [ ] → [OK] .
3. Confirm the entry:
[Finished]
.