TESTO 315-3, Инструкция по эксплуатации

Страница: 17 / 24

7 Maintaining the product
17
- [ ] lights up.
6.4. Bluetooth
®
and IrDA data transfer
Data is transferred via Bluetooth ® if both instruments have
this interface. Otherwise, data is transferred via the IrDA
interface.
Data can currently be transferred to the following testo measuring
instruments:
• testo 330 (0632 3306 / 0632 3307) from firmware version V1.11
• testo 330 (0632 3304 / 0632 3305) from firmware version V1.63
✓ testo 315-3 is on and a measurement has been carried out.
> Switch on data transfer: press and hold down [ ] .
- [ ] lights up. Data is transferred.
Please refer to the operating instructions for the relevant
testo measuring instrument.
7 Maintaining the product
Charging the rechargeable battery
1. Connect the mains unit connector to the instrument's micro
USB socket.
2. Connect the mains plug to the mains socket.
The charging process will start automatically. Charging is indicated
by a change in the battery icon segments.
lights up when the
battery is fully charged.
Cleaning the instrument
Do not use any aggressive cleaning agents or solvents! Mild
household cleaning agents and soap suds may be used.