TESTO 190 P1, Инструкция по эксплуатации

Страница: 16 / 32

3 Commissioning
16
ATTENTION
Strong lateral pressure may cause the communication contacts on the
bottom of the socket to break off!
-
First place the data logger on the sliding bracket and deposit it gently
onto the contacts.
3.4 Connecting the programming and
readout unit to the PC via USB
Please ensure that the case is securely positioned so that the case lid
cannot fall onto the cable.

The computer is started up and the testo 191 Professional software
is enabled.

The battery is connected to the data logger and is functional.

Data logger is placed on a socket of the programming and readout
unit.
1 Insert the micro USB plug into the programming and readout unit and
connect to the computer.

The software establishes a connection to the programming and
readout unit.

Successful connection to the
programming and readout unit is
indicated in green.
If the connection is shown in black, check that the programming and
readout unit is properly connected to your PC. In addition, please
check whether the isolator ring of the data logger is between the
contact pins, see Positioning the data logger in the programming
and readout unit.

The data loggers can be programmed for the measurements using the
testo 191 Professional software.