TESTO 0572 2200 Series, Инструкция по эксплуатации

Страница: 12 / 27

4 Commissioning
This chapter describes the commissioning of the NSF test set up. The
system is mainly designed to enable NSF to do the certification tests.
The system does not support the whole system UI functionality, which
will be offered to end customers in series. The hardware devices have
already achieved nearly series level. The measurement data of the
devices itself is sent to the original Cloud IoT-core, from where the data
can be displayed via Saveris Restaurant Website.
Additional the software
“MTS IoT Core viewer”, allows the user to
display the measurement values on PC and export the data to csv.file.
This software is very limited in its functionality and has only the purpose
to get measurement values from the IoT data base. The UI is simple
and limited.
Measurement and communication cycle is set default by system.
Measurement cycle: 1min
Communication cycle: 1min
4.1 Mounting on the wall
The wall bracket is used to mount the online data logger. Select suitable
mounting materials according to the desired mounting location. The wall mount
can be attached using the supplied adhesive strips. Alternatively, suitable
screws or cable ties can also be used (not included in the scope of delivery).
DANGER
Danger to life!
Electrical lines can be damaged.
-
When fixing the wall bracket by means of screws, do not mount directly
on electrical equipment.
When using adhesive strips, make sure that the substrate is clean and
free of grease.
4.2 Mounting of communication module to
the Gateway