17
Memory settings
Reading or printing memory
OUT
1. Reading out or printing memory contents:
If the “OUT” display is flashing and the
button is pressed,
printing of the complete memory contents is started. Cancel
printout by pressing the
button.
2. Selecting the location:
If
is activated selection options appear in the display to
select the required location. Select location by pressing
.
If printing is activated by pressing
at this point,
all
of the
logs (measurement series and cycles) for this location are
printed.
Cancel printout by pressing the
button.
3. Selecting the log:
Confirm the location selected above by pressing
.
The M.0x counter flashes in the display.
Select the log no. by pressing
.
activates a printout of the selected measurement log.
Press
to display the values measured.
Cancel printout by pressing the
button.
4. Select the measurement cycle
(only possible if a
measurement log consists of a measurement series)
:
Confirm the measurement log selected above by pressing
.
The N.0x counter flashes in the display.
Select the measurement cycle by pressing
.
activates a printout of the selected measurement cycle.
The
button enables you to go back one step.
E
ES
SC
C
L
Lo
oc
ca
at
ti
io
on
n
01:13
1998
M.0
5
5
N.0017
Museum
01.01
824
M.05
5
N.00
1
17
7
Lux
824
Lux
M.05
5
N.0017
O
OU
UT
T
CLEAR
MEMORY
0011
Location
Duct 1
���
ESC
Location
ESC
Location
ESC
Location
ESC
Location
ESC
Location
Press the
button to access the memory settings
mode. Confirm flashing save symbol
via the
button.
Cancel printout by pressing the
button.
i
16
Memory settings
Manual / Automatic saving
824
Lux
M.05
N.0017
AUTO
AUTO
MAN
Manual saving:
Each time
is pressed a log of the measurement is saved in
the instrument and includes measured values, location, date and
time. The counter in the top left corner of the display shows the
number of logs saved for this location.
AUTO
Automatic saving:
When this saving function is set, the instrument automatically
accepts the measured values at fixed intervals and saves them
(=logger operation).
The number of measuring cycles (CYCLE-N.) to be saved and
intervals (CYCLE) have to be programmed:
1. Cycle-N.
The instrument automatically offers the maximum possible
number of measuring cycles. Set required number using
/ / .
Confirm set value by pressing
.
2. Cycle
Select interval in which the measured values are to be saved.
The blinking position can be changed using
.
Confirm set value by pressing
.
Automatic saving is started by pressing
. The symbol flashes
until the programmed measurement series is accepted.
A
AU
UT
TO
O
O U T
MEMORY
MAN
M
MA
AN
N
AUTO
MORY
66
00
AUTO
C Y C L E - N .
ESC
Location
00
01:3
00
AUTO
C Y C L E h
m i n s e c
���
���
M.06
N.0017
A
AU
UT
TO
O
Cancel saving procedure.
Starts automatic saving again.
An additional measurement series is
added.
E
ES
SC
C
L
Lo
oc
ca
at
ti
io
on
n
824
Lux
Museum
M.05
MAN
N.0017
Saving a
log with timed or multi-point mean calculation :
The log includes MIN value, MAX value and mean of the
measurement and also single values in multi-point mean
calculations.
Press the
button to get to the memory settings mode.
Confirm flashing save symbol
via button.
i
