Cabinet for Moist Storage
of Mortar Prisms in Triple Moulds
1.0330
3
1.
Basic instructions
1.1 Designation
Designation of the device:
Please see the name plate on the cabinet, which shows
the complete characteristic data and the electric prop-
erties of the system.
1.2 Purpose for which this system was designed
This Operating Manual contains the information required for operation of the products
described here, for the purpose for which they have been designed. This Operating Man-
ual is intended to be used only by technically qualified staff.
“Technically qualified staff” is defined as those persons who – as a result of their training;
their experience; the instructions which they have received; as well as their knowledge of
the relevant standards, regulations, accident-prevention regulations, and conditions of
product operation in the company
– have been authorized by the person responsible for
the safety of the company equipment to carry out the activities and actions required for
operation of the equipment described below, and who can recognize and prevent any
possible dangers arising from such operation (this definition of technically qualified staff
has been provided in IEC 364).
The User must by all means observe the requirements and limit values, as well as all
safety instructions, given in this Operating Manual. Any use of this device not in conform-
ity with these stipulations shall be considered to be in violation of the use for which this
system was intended. If this device must be operated under special conditions, or with
special modes of operation, then this shall be authorized only after consultation with the
manufacturer, and after obtaining his prior and express approval.
This Cabinet is intended for storage of test specimens in accordance with EN 196, in triple
Moulds. These standards stipulate a temperature of 20
1°C and a relative humidity
>
90% for storage of such Moulds. The Cabinet has been set at the manufacturer’s plant
to conform with these conditions.
Caution
The instructions contained in this Operating Manual are intended only for
the correct use of the Cabinet for Moist Storage of Mortar Prisms in Triple
Moulds. In order to perform the necessary testing correctly, the User must
observe the specific standards for such testing.
This Operating Manual is intended to be read and followed by the freight carrier,
the fitters and installers, the Operators and Users, the service and repair staff, and
the persons who must dispose of (scrap) the system.
It is absolutely necessary to read and understand all the instructions in this Oper-
ating Manual in order to operate this properly and safely.