TestEquity FOV Series, Руководство по установке и эксплуатации

Страница: 31 / 43

31 | P a g e
OPERATION
L
AUNCH A
H
EATING
P
ROFILE
The oven can be run in a timed steady-state heating profile at the current temperature set point.
Allow the oven to come up to temperature prior to launching a profile. See the Setting the Timer
procedure on page 29 for how to set the length of the profile.
Note: While the Timer system is on, the oven will not heat unless a profile is running.
End of procedure
1
The
Timer switch must be in the ON ( I ) position just prior to
launching the profile.
Set Timer
1 Hour, 55 Minute Profile
2
Press the
Start/Stop T button to launch the current profile.
•
The profile will launch and the TIMER ACTIVATED
indicator will illuminate.
•
The Timer Display will start counting down.
•
The oven will resume heating.
Set Timer
3
To pause a running profile, press the Start/Stop button.
•
The oven will cease heating until the profile is
restarted, reset, or the Timer system is turned off.
•
To restart the profile where it left off, press the
Start/Stop
button again.
Pause Profile
4
The oven will automatically cease heating upon reaching
“00:00”.
•
To resume manual heating place the
Timer Switch in the OFF ( O ) position.
- Or -
•
To launch another profile press the “//” Reset
button and enter a new profile, or allow the previous profile
to reset automatically after 5 seconds.
Set Timer
Profile Complete