TestEquity FOV Series, Руководство по установке и эксплуатации, Страница: 29 / 43

29 | P a g e
OPERATION
S
ETTING THE
T
IMER
This procedure enters a heating profile duration in the Timer system. When launched, the profile
runs the oven for the duration at the present temperature set point.
Procedure continued on next page
1
Turn on the Timer system.
a. Place the black Timer switch in the On ( I )
position.
•
The Timer Display will illuminate, showing the
previously programmed profile duration.
•
The oven will cease heating.
Set Timer
1 Minute Profile
2
Place the Timer display in its adjustable set timer mode.
a. Press and hold the
Reset
button until
the Timer Display begins to blink.
•
The illuminated decimal point between the 2
nd
and 3
rd
numbers indicates that Hours parameter is selected.
Note : If 5 seconds elapse with no activity on the Arrow Pad buttons, the Timer
Display will exit the adjustment mode with the last entered time values saved.
Set Timer
Hours Selected
3
Use the Up or the Down arrow key to adjust the Hour
parameter to a setting from 0 to 99.
Set Timer
1 Hour, 1 Minute
4
Advance to the Tens-of-Minutes parameter.
a. Press and hold the Reset button.
•
The flashing decimal point will advance to
between the third and fourth numbers, automatically
saving the new Hour parameter setting.
Set Timer
Tens of Minutes Selected