TestEquity FOV Series, Руководство по установке и эксплуатации

Страница: 22 / 43

22 | P a g e
CONTROL PANEL OVERVIEW
Timer Display and Control Pad
The SET TIMER display shows the duration of the currently programmed heating profile, or a
flashing duration adjustment mode, or the countdown of an active profile to 0.
The “//” RESET button is used to place the Timer display in its adjustable duration mode, and then
to scroll through the duration time parameters.
The SET TIMER arrow buttons adjust the heating profile duration time parameters when the display
is in its blinking adjustment mode.
The “T” START/STOP timer button launches a heating profile or pauses an active profile.
Temperature Display and Control
Marked SET TEMPERATURE, this display shows the current oven chamber air temperature
accurate to within 1.0
° C. The display can also show an adjustable temperature set point in its set
point adjustment mode, as well as an adjustable chamber temperature value while in calibration
mode.
The arrow buttons can be used to adjust the temperature set point or put the unit into its calibration
mode, and then enter a calibration offset value.
Heating Activated Light
The green light located beneath the label HEATING ACTIVATED illuminates whenever the oven
elements are powered and heating the oven chamber. The oven uses measured pulses to achieve
and maintain the temperature set point.