Testec TT-SI 7002, Инструкция по эксплуатации

Страница: 5 / 12

Man_7002_0919 www.testec.de 3
Definitions
Measurement Category II (CAT II)
refers to local-level electrical distribution, such as that provided by a standard wall
outlet or plug-connected equipment. Examples of CAT II measurements would be
household appliances, portable tools, and similar modules.
Measurement Category III (CAT III)
refers to measurements on hard-wired equipment in fixed installations, distribution
boards, and circuit breakers that form part of a building wiring installation. Other
examples are wiring, including cables, bus bars, junction boxes, switches, socket
outlets in the fixed installation, and stationary motors with permanent connections to
fixed installations
Pollution Degree 2
refers to an operation environment where normally only dry, non-conductive pollution
occurs. Temporary conductivity caused by condensation can be expected.
Working CAT rating is equal to that of the lowest rated element
within the test set-up.
Compliance Statements
EC Declaration of Conformity
The product conforms to the applicable European Union requirements per
IEC 61010-031:2015 Safety requirements
for electrical equipment for measurement, control and laboratory use.
Part 31: Safety requirements for hand-held probe assemblies for electrical
measurement and test.
EU RoHS Compliance
The probe and accessories conform to the 2011/65/EU RoHS2 Directive.
Disposal of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with
separate collection systems). This product is subject to Directive
2012/19/EU of the European Parliament and the Council of the European
Union on waste electrical and electronic equipment (WEEE), and in
jurisdictions adopting that Directive, is marked as being put on the market
after August 13, 2005, and should not be disposed of as unsorted
municipal waste. Please utilize your local WEEE collection facilities in the
disposition of this product and
otherwise observe all applicable requirements.
This probe is in compliance with IEC 61010-031:2015 CAT III, Pollution Degree 2.